| SASO GSO EN 13950 | Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test method |
| EN 13950 | |
| SASO GSO EN 14209 | Preformed plasterboard cornices – Definitions, requirements and test methods |
| EN 14209 | |
| SASO EN 13162 | Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification |
| EN 13162 | |
| GSO EN 13165 | Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products. Specification |
| EN 13165 | |
| SASO ASTM C578 | Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| ASTM C578 | |
| SASO GSO ISO 8873-1 | Rigid cellular plastics – Spray- applied polyurethane foam for thermal insulation – Part 1: Material specifications |
| ISO 8873-1 | |
| SASO GSO ISO 8873-2 | Rigid cellular plastics – Spray-applied polyurethane foam for thermal insulation – Part 2: Application
|
| ISO 8873-2 | |
| SASO GSO BS 4841-1 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated insulation boards with auto-adhesively or separately bonded facings |
| BS 4841-1 | |
| SASO GSO BS 4841-2 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively bonded facings for use as thermal insulation for internal wall linings and ceilings |
| BS 4841-2 | |
| SASO GSO BS 4841-3 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
| BS 4841-3 | |
| SASO GSO BS 4841-4 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications. Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
| BS 4841-4 | |
| SASO GSO BS 4841-5 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as thermal insulation boards for pitched roofs |
| BS 4841-5 | |
| SASO GSO BS 4841-6 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insulation for floors |
| BS 4841-6 | |
| SASO ASTM C549 | Standard Specification for Perlite Loose Fill Insulation |
| ASTM C549 | |
| SASO ASTM C516 | Standard Specification for Vermiculite Loose Fill Thermal Insulation |
| ASTM C516 | |
| SASO GSO EN 771-4 | Specification for masonry units. Autoclaved aerated concrete masonry units |
| EN 771-4 | |
| SASO- EN-998-1 | Specification for mortar for masonry. Rendering and plastering mortar |
| EN 998-1 | |
| SASO GSO EN 13707 | Flexible sheets for waterproofing Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics |
| EN 13707 | |
| GSO EN 13970 | Flexible sheets for waterproofing – Bitumen water vapour control layers – Definitions and characteristics |
| EN 13970 | |
| GSO EN 13984 | Flexible sheets for waterproofing – Plastic and rubber vapour control layers – Definitions and characteristics |
| EN 13984 | |
| GSO EN 681-1 | Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber |
| EN 681-1 | |
| SASO ISO 2219 | Thermal insulation products for buildings – Factory-made products of expanded cork (ICB) – Specification |
| ISO 2219 | |
| SASO ASTM C1126 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C1126 | |
| GSO EN 14909 | Flexible sheets for waterproofing – Plastic and rubber damp proof courses – Definitions and characteristics |
| EN 14909 | |
| GSO EN 14782 | Self-supporting metal sheet for roofing, external cladding and internal lining – Product specification and requirements |
| EN 14782 | |
| GSO EN 14783 | Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements |
| EN 14783 | |
| SASO 2752 | Aluminium Composite Panel for External Cladding and Internal Finish |
| SASO ISO 4586-1 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 1: Classification and specifications |
| ISO 4586-1 | |
| SASO ISO 4586-2 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties — Amendment 6: Resistance to wet heat |
| ISO 4586-2 | |
| SASO ISO 4586-3 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates |
| ISO 4586-3 | |
| SASO ISO 4586-4 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| ISO 4586-4 | |
| SASO ISO 4586-5 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| ISO 4586-5 | |
| SASO ISO 4586-6 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater |
| ISO 4586-6 | |
| SASO ISO 4586-7 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifications for design laminates |
| ISO 4586-7 | |
| SASO ISO 4586-8 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates |
| ISO 4586-8 | |
| SASO ISO 13894-2 | pressure decorative laminates – Composite elements – Part 2: Specifications for composite elements with wood-based substrates for interior use |
| ISO 13894-2 | |
| SASO ISO 9125 | Fiber-Cement Slates and Fittings |
| ISO 9125 | |
| SASO GSO ISO 2457 | Solid wood parquet – Classification of beech strips |
| ISO 2457 | |
| SASO GSO ISO 1324 | Solid wood parquet – Classification of oak strips |
| ISO 1324 | |
| SASO GSO ISO 3398 | Broadleaved wood raw parquet blocks – Classification of oak parquet blocks |
| ISO 3398 | |
| SASO GSO ISO 3399 | Broadleaved wood raw parquet blocks – Classification of beech parquet blocks |
| ISO 3399 | |
| SASO GSO ISO 3397 | Broadleaved wood raw parquet blocks – General characteristics |
| ISO 3397 | |
| SASO GSO ISO 5320 | Solid wood parquet – Classification of fir and spruce strips |
| ISO 5320 | |
| SASO GSO ISO 5321 | Coniferous wood raw parquet blocks – General characteristics |
| ISO 5321 | |
| SASO GSO ASTM C1492 | Standard Specification for Concrete Roof Tile |
| ASTM C1492 | |
| SASO ASTM C406 | Standard Specification for Roofing Slate |
| ASTM C406 | |
| SASO GSO ASTM C726 | Standard Specification for Mineral Wool Roof Insulation Board |
| ASTM C726 | |
| SASO GSO ISO 10904 | Fiber-cement corrugated sheets and fittings for roofing and cladding |
| ISO 10904 | |
| SASO GSO ISO 8145 | Thermal insulation – Mineral wool board for over deck insulation of roofs – Specification
|
| ISO 8145 | |
| SASO GSO ISO 834-9 | Fire-resistance tests – Elements of building construction – Part 9: Specific requirements for non-loadbearing ceiling elements |
| ISO 834-9 | |
| SASO GSO EN 12326-1 | Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate
|
| EN 12326-1 | |
| SASO GSO ISO 9076-2 | Thermal insulation – Mineral-wool loose-fill for horizontal applications in ventilated roof spaces – Part 2: Principal responsibilities of installers |
| ISO 9076-2 | |
| SASO GSO ISO 12567-2 | Thermal performance of windows and doors – Determination of thermal transmittance by hot box method – Part 2: Roof windows and other projecting windows |
| ISO 12567-2 | |
| SASO GSO ISO 27769 | Wood-based panels – Wet process fiberboard |
| ISO 27769 | |
| SASO GSO ISO 8335 | Cement-bonded particleboards – Boards of Portland or equivalent cement reinforced with fibrous wood particles |
| ISO 8335 | |
| SASO EN 1096-1 | Glass in building – Coated glass – Definitions and classification |
| EN 1096-1 | |
| SASO EN 1096-2 | Glass in building – Coated glass – Part 2: Requirements and test methods for class A, B and S coatings |
| EN 1096-2 | |
| SASO EN 1096-3 | Glass in building – Coated glass – Part 3: Requirements and test methods for class C and D coatings |
| EN 1096-3 |
CONTACT US
""
1